It can be equipped with different types connection ends, as 45° / 90 ° elbow, Tee, concentric/ eccentric 0° reducers...... weld, clamp, unions......... standard type 3A, SMS, DIN, BS, BPE....etc.
Surface :
1) ID/OD polishing
2) Only ID polishing
3) Only OD polishing
4) unpolished
Roughness: #400, #320, #240, #180............
Ra < 0.8 μm, 0.6 μm, 0.5 μm, 0.4 μm........(Other Surface finished can be ordered)
CSE Sanitary tubes for Pharmaceutical, Semiconductor, Cosmetic, Food and Dairy Industry etc.
Material : ASTM 304, 304l, 316l
Spec : ASTM A269, A270
Surface & Roughness :
1) OD/ID Pickle ( Ra ≤ 1.0 μm)
2) Polished :
1) ID Polished to 180Grit ( Ra ≤ 0.8 μm)
2) ID Polished to 240Grit ( Ra ≤ 0.6 μm)
| BPE Standard | 3A STANDARD | SMS STANDARD | DIN 11850 / 11865 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | OD | T | Size | OD | T | Size | OD | T | Size | OD-DB | OD-DA | OD (11865) | T |
| 1/4" | 6.35 | 0.89 | 1/4" | 6.35 | 1.245 | - | - | - | DN6 | - | - | 8 | 1 |
| 3/8" | 9.53 | 0.89 | 3/8" | 9.525 | 1.245 | - | - | - | DN8 | - | - | 10 | 1 |
| 1/2" | 12.7 | 1.65 | 1/2" | 12.7 | 1.65 | - | - | - | DN10 | 12 | 13 | 13 | 1.5 |
| 3/4" | 19.05 | 1.65 | 3/4" | 19.05 | 1.65 | - | - | - | DN15 | 18 | 19 | 19 | 1.5 |
| 1" | 25.4 | 1.65 | 1" | 25.4 | 1.65 | - | - | - | DN20 | 22 | 23 | 23 | 1.5 |
| 1.5" | 38.1 | 1.65 | 1.5" | 38.1 | 1.65 | DN25 | 25 | 1.25 / 1.5 | DN25 | 28 | 29 | 29 | 1.5 |
| 2" | 50.8 | 1.65 | 2" | 50.8 | 1.65 | DN38 | 38 | 1.25 / 1.5 | DN32 | 34 | 35 | 35 | 1.5 |
| 2.5" | 63.5 | 1.65 | 2.5" | 63.5 | 1.65 | - | - | - | DN40 | 40 | 41 | 41 | 1.5 |
| 3" | 76.2 | 1.65 | 3" | 76.2 | 1.65 | DN50 | 51 | 1.25 / 1.5 | DN50 | 52 | 53 | 53 | 1.5 |
| 4" | 101.6 | 2.11 | 4" | 101.6 | 2.1 | DN63 | 63.5 | 1.5 | DN65 | 70 | 70 | 2 | |
| - | - | - | 5" | 127 | 2.77 | DN76 | 76.1 | 1.6 / 2 | DN80 | 85 | 85 | 2 | |
| 6" | 152.4 | 2.77 | 6" | 152.4 | 2.77 | DN100 | 101.6/104 | 2 | DN100 | 104 | 104 | 2 | |
| - | - | - | 8" | 203.2 | 2.77 | - | - | - | DN125 | 129 | 129 | 2 | |
